Download Qualcomm QC – MTK 2.0.1 Unlock Tool Drivers [2026]

What Is the Qualcomm QC-MTK 2.0.1 Driver Package

Qualcomm QC-MTK 2.0.1 is the official driver package for Unlock Tool. It has the USB drivers for both Qualcomm and MediaTek together, so there’s no need to hunt for separate drivers. The installer comes as a signed. exe, which means Windows installs it without blocking it. If you flash Qualcomm or MTK phones with Unlock Tool, you need these drivers on your PC. Without them, the tool won’t detect the phone in EDL or BROM mode at all.

What’s Inside the Package

The package has three things inside. The Qualcomm QDLoader 9008 driver detects the phone in EDL mode and is required for Qualcomm flashing. The MTK USB driver is for MediaTek preloader and BROM mode, and without it an MTK phone won’t talk to the PC. And the libusb/WinUSB driver handles BROM communication. If it’s missing, the tool will give a “libusb driver is not installed” error. All three install together, so you don’t need to do them separately.

Download QC-MTK 2.0.1 Drivers (Free)

The QC-MTK 2.0.1 drivers download link is at the top of this post. It’s the latest version and completely free to download. The file is a signed exe, so Windows will install it directly and no warning will pop up. After downloading, install it using the steps in the next section. No password, no survey. Just download it and install it.

Package Details

Here are the package details: version 2.0.1, which is the latest so far. Windows 7, Windows 10, and Windows 11 are all supported, and it runs without any problems on 64-bit systems. The file size is small, so the download won’t take long.

Qualcomm Drivers Explained

Qualcomm driver is a driver for Qualcomm-based phones with a Snapdragon chip. When you put your phone in EDL mode, Windows recognises the device as QDLoader 9008, and this driver enables that. You don’t really need to worry about 64-bit versions of Windows, because the Qualcomm driver is already tested on 64-bit Windows. Many people are questioning whether Qualcomm works with 64-bit or not, but you don’t have to. When you install it, QDLoader 9008 will show in Device Manager.

Preloader & BROM Mode Drivers

Preloader and BROM are the two modes in MTK mobiles. The preloader driver is what gets your phone recognized when plugged in while it is turned off. BROM goes a step further than this, and is what you’ll use to revive a dead-boot/ bricked phone.

This package has drivers for both. When you plug in the phone, you’ll see “Media Tek Pre Loader USB VCOM” in Device Manager, meaning you installed the driver properly.

libusb / WinUSB Driver

This is the driver that manages the MTK BROM communication. If this driver is not present, the Unlock Tool will not work, it will detect your phone but error: “libusb driver is not installed”. The best thing about the libusb/WinUSB driver is that it comes installed in this package; just install the package and the driver is ready.

Brand Drivers – Oppo & iPhone

The package also features drivers for a couple of popular brands. Oppo driver for the Unlock Tool is inside it, and this driver can be used to detect phones that run ColorOS. So, from this one package, you can take care of Oppo and iPhone work along with Qualcomm and MTK. You do not have to download a separate driver pack.

How to Install the Drivers

Right-click the. exe and click Run as administrator. The package is digitally signed, but you still need to run it as admin because if not, some drivers will be half-installed. Click on Install and wait for 2-3 min; the drivers will be installed one by one. When it’s done, restart your PC; don’t forget this step, because Windows does not activate new drivers without a restart. When the PC is restarted, plug in your phone, and Unlock Tool will recognize it immediately.

Verify in Device Manager

Check in Device Manager after install. When you connect to a Qualcomm phone, “QDLoader 9008” should be visible, and for an MTK phone, “MediaTek PreLoader USB VCOM”. If neither of these appear, reinstall the driver. None of the entries should have a yellow warning. If any do, it means your driver is only partially installed, so right-click it and choose update or reinstall.

Fix “libusb Driver Is Not Installed” Error

Showing up when your MTK is detected in BROM mode but you haven’t installed the libusb filter. Not a problem! Install the libusb filter using Run as administrator as you need admin rights to install the libusb filter. If you continue to receive the error, try installing the libusb filter manually instead of using zadig. Force the phone in BROM mode, then update its driver from the Device Manager and point the driver to the libusb. The error shouldn’t show up again.

FAQ

What is the QC-MTK 2.0.1 driver package?

This is the official driver package for Unlock Tool, with USB drivers for both Qualcomm and MTK. It comes as a signed exe and is a free download.

Is the download free?

Yes, it’s completely free. No password, no survey.

Does it work on Windows 7 64-bit?

Yes. It works on Windows 7, 10, and 11, and it’s tested on 64-bit too.

What is QDLoader 9008 mode?

This is Qualcomm’s EDL mode. When the phone connects to the PC in this mode, Windows recognizes it as “QDLoader 9008,” and flashing is done in this mode.

Why does Unlock Tool say “libusb driver is not installed”?

That means the libusb filter didn’t get installed. Reinstall the package with Run as administrator, since that usually fixes it.